







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in McKinney?
Walk-in shower installation in McKinney typically costs $4,500 to $12,000, with most homeowners landing between $6,000 and $8,500 for a standard curbless or low-curb shower in a primary bath. The wide range comes down to three things: the size of the shower, the tile and fixtures you choose, and how much plumbing has to move. A simple alcove shower with a prefab pan sits at the low end; a large walk-in with a linear drain, custom tile, and a frameless glass panel climbs toward the top.
We’re Bradford Remodeling Co McKinney, and we give every homeowner a written price before any work starts. No numbers that move at the door. That’s The Garrison Standard, and it’s non-negotiable on every job, including a single shower in a McKinney guest bath.
Key Takeaways
- Walk-in shower installation in McKinney runs $4,500 to $12,000; the midpoint for a typical primary-bath shower is $6,000 to $8,500.
- The glass, tile, and drain choice drive most of the spread. Labor sits in a tighter band than most homeowners expect.
- Moving the drain or an existing rough-in adds $800 to $2,500 on its own.
- Our technicians have up to 22 years of experience, and every completed shower carries the 365-Day Done Right Promise – if the work fails inside that year, we come back and correct it at no charge.
- You get a written price before we open a wall, and a real person answers the phone 24/7 at (844) 834-0609.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s where the money actually goes on a McKinney walk-in shower. These are installed ranges for the local market in 2026, not national averages.
| Line item | Typical range | What it covers |
|---|---|---|
| Shower base / pan | $400 – $1,800 | Prefab acrylic or fiberglass pan at the low end; custom mud-set tile pan at the high end. |
| Tiling (walls and floor) | $1,200 – $4,500 | Depends on square footage, tile type, and pattern. Large-format porcelain costs less in labor than a mosaic with tight grout lines. |
| Waterproofing / substrate | $300 – $900 | Cement board or foam board, plus a liquid or sheet membrane behind the tile. Non-negotiable for a shower that lasts. |
| Glass enclosure (frameless) | $800 – $3,000 | The single biggest swing factor. Framed doors cost less; a full frameless fixed panel with a hinged door costs more. |
| Fixtures (showerhead, valve, trim) | $300 – $1,800 | Kohler and Moen are our documented standards. A thermostatic valve and multiple outlets push this up. |
| Drain and rough plumbing | $250 – $1,200 | Linear drains and relocated drains run higher than a straight replacement of an existing center drain. |
| Demo and disposal | $400 – $1,000 | Tearing out the old shower or tub, hauling debris, protecting the rest of the bathroom. |
| Labor (all trades) | $1,000 – $2,800 | Plumbing, waterproofing, tile set, glass installation, finish work. |
| Permit and inspection | $150 – $600 | McKinney permitting and inspection where the scope requires it. See below for what triggers a permit. |
Add those up for a mid-grade primary-bath shower and you land around $6,000 to $8,500. Go with a large-format tile job, a frameless glass panel, and a linear drain, and you’re at the top of the $12,000 range. The biggest single lever you have is the glass. A frameless enclosure alone can move a project $1,500 to $2,000 compared to a framed one.
What Affects Walk-In Shower Installation Pricing in McKinney
McKinney is a market where most of the housing stock was built between the late 1990s and the 2010s. That means we’re usually working on framer-built showers over cement board from the original build, not 1970s mud-set tile. It changes the labor picture a little, and it affects what we find once the tile comes off.
- Shower size. A 36×60 alcove shower fits inside the footprint of a standard McKinney tub-shower combo and runs toward the low end. A 48×60 or larger walk-in with a bench runs higher on materials and tile labor. Anything over 15 square feet of floor space starts adding to the waterproofing and substrate line.
- Drain relocation. If your McKinney home has a center drain where the new linear drain needs to go, we’re cutting concrete slab or running new PEX through a wall cavity. That’s $800 to $2,500 on top of the base price, and it’s the most common hidden cost in older McKinney neighborhoods like Stonebridge Ranch where the original drain placement is fixed.
- Tile selection. Porcelain and ceramic are the workhorses around here. Natural stone (travertine, marble, slate) costs more for the material and requires more careful sealing. A herringbone or basketweave pattern adds labor over a straight lay.
- Glass enclosure type. Framed sliding doors are the budget option. Frameless fixed panel plus a hinged door is the premium option, and it’s the one most homeowners ask for. Custom-cut glass for a non-standard opening adds cost and lead time.
- Rough-in condition. Replacing a shower in place is cheaper than converting from a tub. If the original shower in a Frisco-built or Allen-built home has a failed waterproofing layer or a cracked pan (we see this regularly on showers from the 2004-2008 building boom), the repair adds to the tab before new tile goes up.
- Permits and inspections. McKinney requires a permit when the scope includes plumbing rough-in changes or a drain relocation. A straight tile-and-glass replacement over an existing pan usually doesn’t. We handle the permit pull and the inspection scheduling, and it’s in the written price.
One local note worth flagging: North Texas clay soil moves. We regularly see hairline cracks in tile pans and grout joints in McKinney showers that were set over a slab in the early 2000s, especially in houses built on the heavier clay around the Stonebridge Ranch and Craig Ranch areas. The fix isn’t more grout. It’s a proper substrate and a decoupling membrane under the tile, which we build into the written price from the start.

How to Save on Walk-In Shower Installation
There are real ways to bring a McKinney walk-in shower down in price without cutting the parts that matter. Here’s what actually works.
- Keep the drain where it is. The single biggest savings on the labor side. If your existing shower drain works with a center-drain pan or a tileable linear drain that fits the existing hole, you save $800 to $2,500.
- Choose a prefab pan over a custom mud-set tile floor. A tile floor looks great, but a prefab acrylic or fiberglass pan costs $400 to $900 installed versus $1,500 to $2,500 for a custom tile pan. It’s easier to clean, too.
- Go framed over frameless on glass. A framed sliding door is $800 to $1,500 less than a frameless panel. If you want the frameless look, consider a single fixed panel with a simpler door rather than a custom-cut three-panel setup.
- Pick a standard tile size and a straight lay. Large-format 12×24 porcelain set in a stacked pattern takes less labor than an intricate mosaic. The material cost is often lower too.
- Bundle the shower with other bathroom work. If the vanity is on its way out or the floor tile is worn, doing the shower and vanity together spreads the demo and set-up labor across the whole project. A bathroom remodel in McKinney runs $9,000 to $28,000, and the shower portion inside a full remodel is more efficient than a shower alone.
One caution on “saving”: waterproofing and substrate are not where you cut. A shower that leaks into a McKinney slab is a $5,000 to $15,000 problem, not a $300 problem. That’s why the 365-Day Done Right Promise covers the whole shower for a full year – if it fails inside the guarantee period, we come back and correct it at no charge. You can’t underwrite that promise if you skip the membrane.
If you’ve been burned by a contractor who gave a low bid and then repriced once the wall was open, the fix is a written price before demolition. We put ours in writing before any tool comes out. Call (844) 834-0609 for a free estimate and we’ll walk the bathroom with you.
Do You Need a Permit for a Walk-In Shower in McKinney?
In McKinney, you need a permit when the shower install involves a plumbing rough-in change, a drain relocation, or a change to the wall framing or waterproofing of an existing shower. A straight replacement of the tile and glass over an existing, code-compliant pan and rough-in usually does not require one. When a permit is required, the city inspects the rough plumbing and the finished waterproofing before the tile goes up, and it’s built into the price. We schedule the inspections and don’t leave the site until they’re signed off.
Can You Install a Walk-In Shower in a Day?
No. A walk-in shower install in McKinney takes three to six working days for a typical replacement, longer if the scope includes a tub-to-shower conversion or a drain relocation. Day one is demo and rough-in. Days two and three are substrate and waterproofing, which must cure. Days three to five are tile. Glass is templated and ordered after the tile is set, so there’s usually a five-to-ten day gap before the enclosure is installed. The total from first hammer to final glass is commonly two to four weeks. A “one-day shower” is a prefab surround bolted over the existing wall. It’s a different product and a different price point, and it won’t hold up the way a properly built walk-in does.
Is It Cheaper to Repair or Replace a Walk-In Shower?
Repair usually wins if the shower is under ten years old and the trouble is isolated to grout, caulk, or a single fixture. Repairs in McKinney typically run $150 to $800 for a re-grout, a re-caulk, or a valve replacement, and $800 to $2,500 if a section of tile or a pan has to be rebuilt. Once the waterproofing layer is compromised or the pan has failed, replacement is the better answer. A shower replacement in McKinney runs $3,000 to $8,500, and a full walk-in installation runs $4,500 to $12,000. The decision point is simple: if you’re looking at a waterproofing failure, tile patching won’t fix the leak. It just hides it for a season. Call (844) 834-0609 for a free assessment – estimates are free and we’ll tell you honestly whether the shower can be saved or needs to come out.
What’s the Difference Between a Walk-In Shower and a Tub-to-Shower Conversion?
A walk-in shower installation replaces an existing shower with a new shower. A tub-to-shower conversion removes a tub and replaces it with a shower, which involves a bigger scope: capping the tub drain, re-routing the valve, building a new pan, and often reworking the floor. In McKinney, a walk-in shower installation runs $4,500 to $12,000. A tub-to-shower conversion runs $3,500 to $10,000 because it starts with a tub rather than an existing shower. Tub-to-shower is often cheaper when a homeowner already has a tub they’re ready to remove. Walk-in installation is the right call when the shower already exists and just needs a full rebuild.
How Do You Choose a Walk-In Shower Contractor in McKinney?
Ask four questions before you sign anything. The answers tell you most of what you need to know.
- Is the price in writing before work starts? A written, itemized price before demolition is the baseline. If a contractor wants to “get together on the final number later,” that’s the number that grows.
- What’s the guarantee, in years? Bradford’s 365-Day Done Right Promise is a full year of coverage on every completed shower. If the work fails inside that window, we come back and correct it at no charge. Get the guarantee term in writing.
- Who’s walking through my door? Every technician on every Bradford job is background-checked and uniformed. Homeowners know who’s coming before the crew arrives.
- What brands are specified? We work with a documented roster that includes Kohler and Moen fixtures, plus KraftMaid and Wellborn cabinetry when the shower work is part of a larger bathroom remodel. Traceable specifications mean fewer substitutions and fewer surprises.
We’re part of the Garrison Partners family, and every independently owned Garrison location is held to The Garrison Standard – the framework behind the written price, the 365-Day Done Right Promise, and the live-person phone coverage. Bradford Remodeling Co McKinney answers the phone 24/7, not with a voicemail or a callback queue. A real person picks up. That matters at 9 p.m. on a Saturday when a family is looking at a demo mid-shower and wants to know when the tile guy is coming back.
For context on how walk-in shower work fits into a full bath renovation, see our McKinney service area page and the bathroom remodel guide for the full scope and price picture. If you want to see how we handle a full project, the home page has the overview.
FAQs – Walk-In Shower Installation Cost in McKinney
How much does walk-in shower installation cost in McKinney in 2026?
Walk-in shower installation in McKinney runs $4,500 to $12,000 in 2026, with most primary-bath showers landing between $6,000 and $8,500. The range reflects size, tile, glass, and whether the drain or rough plumbing has to move. Call (844) 834-0609 for a free, written estimate on your specific bathroom.
Is a walk-in shower cheaper than a tub-to-shower conversion?
A walk-in shower installation ($4,500 to $12,000) is usually more than a straight tub-to-shower conversion ($3,500 to $10,000) because the walk-in has tile on all sides plus a glass enclosure, while a conversion often reuses the tub’s plumbing footprint. The two overlap in the middle. Which is cheaper depends on the specific bathroom. Call (844) 834-0609 with the layout and we’ll price both options.
Do I need a permit for a walk-in shower in McKinney?
Yes if the job involves a drain relocation, a plumbing rough-in change, or a framing change. No if it’s a straight tile-and-glass replacement over an existing code-compliant pan. McKinney permits run $150 to $600 and inspections are scheduled before tile goes up. Call (844) 834-0609 – we tell you up front whether your project needs one.
How long does a walk-in shower installation take in McKinney?
Three to six working days on site for a typical replacement, and two to four weeks door-to-door once glass template and delivery are included. Tub-to-shower conversions and drain relocations run longer. Repairs run one to two days. Call (844) 834-0609 and we’ll give you a written timeline with the written price.
What’s the cheapest way to install a walk-in shower in McKinney?
Keep the drain where it is, choose a prefab pan, go framed on the glass, and pick a standard large-format porcelain tile. That combination typically lands in the $4,500 to $6,000 range in McKinney. Don’t cut waterproofing or substrate – those are what keep the shower from failing inside the 365-Day Done Right Promise. Call (844) 834-0609 for a free estimate.
Get a Written Price Before Any Work Starts
Bradford Remodeling Co McKinney gives you a written price before a single tool comes out. Every walk-in shower we install carries the 365-Day Done Right Promise – if the work fails inside the guarantee window, we come back and correct it at no charge. Our technicians have up to 22 years of experience, every crew is background-checked and uniformed, and a real person answers the phone 24/7. When your shower is done, the site is clean, the scope is documented, and the signed written guarantee is in your hand. That’s what squared away looks like.
Call (844) 834-0609 for a free estimate on walk-in shower installation in McKinney. We’ll walk the bathroom, measure the rough-in, and put the price in writing before you commit to anything.
Pricing reflects the McKinney market as of 2026. Bradford Remodeling Co McKinney offers free estimates – call (844) 834-0609.
What Our Customers Say
"Kitchen remodel run by a veteran-owned crew. They started on the day promised, kept the site clean, and gave weekly updates. New cabinets and counters look great."
- Alan M."Primary bath redo. Tile is straight, shower pan was flood tested, and the vanity fits perfectly."
- Tricia S."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P.












