







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterKitchen Island Installation Cost in McKinney, TX: What Post-Tension Slabs Actually Add
Kitchen island installation in McKinney runs $3,000-$10,000 for a standard island, but a fixed island with a sink or dedicated circuit in a post-tension slab home climbs to $7,000-$14,000+ once you add the structural engineer review and licensed coring contractor. The utility work, not the cabinetry, is what moves the number. Add a sink or a circuit and you’re looking at the higher end. Call (844) 834-0609 for a written price before any tool comes out.
Adding an island with a sink or dedicated circuit sounds straightforward, until you learn your McKinney home sits on a post-tension slab and the cable map hasn’t existed since 1998. That’s not a scare story. It’s the single biggest line item most national cost guides never mention, and it’s the one that decides whether your island project is a weekend and a delivery or a three-week engineering review.
Key Takeaways
- Freestanding islands with no utilities: $1,800-$4,500 installed.
- Fixed islands with electrical only: $4,200-$7,500 including panel work.
- Fixed islands with sink and disposal requiring slab penetration: $7,000-$14,000+ depending on engineer and coring fees.
- City of McKinney requires electrical and plumbing sub-permits for utility islands. Bradford pulls those permits inside the written scope.
- PT-slab core work adds $800-$2,500 and 2-3 weeks before the island is even framed.

Why Post-Tension Slabs Make McKinney Island Pricing Different
Most McKinney subdivisions built after 1988 sit on post-tension slabs: Stonebridge Ranch, Craig Ranch, and the bulk of the master-planned tracts north of Eldorado Parkway. Those slabs carry live steel tendons under tension, threaded through the concrete like guitar strings. Nail a framing anchor into one, or punch a drain through one, and you’ve done real damage. The tendon can pop the edge of the slab, and the repair isn’t cosmetic.
That’s why utility islands in McKinney start with a ground-penetrating radar scan and an engineer’s as-built review, not with a truck full of cabinets. The scan locates live tendons. The engineer signs off on where coring and conduit can safely go. A licensed PT-slab coring contractor does the penetration. Skip that sequence and you void the slab warranty and, in most cases, break code. The $800-$2,500 and 2-3 weeks it adds is what honest McKinney pricing looks like.
Here’s the operator reality behind that number. The Blackland Prairie clay under McKinney swells and shrinks hard with every wet-dry North Texas cycle, which is why foundation work is the defining construction specialty here. On a slab that’s already moving, sinking an unreviewed anchor bolt is a bad bet. Bradford Remodeling Co McKinney won’t frame a utility island until the engineer’s review is signed off and the coring contractor has been scheduled. That’s The Garrison Standard in practice: every price and every scope in writing, including the parts that slow the job down.
Kitchen Island Installation Cost in McKinney by Type
Pricing splits into three clear tiers. Whether you need trenching and coring is what separates them, and it’s the only variable most homeowners need to understand up front.
| Island type | Typical installed range |
|---|---|
| Freestanding island (no utilities, no anchoring to slab) | $1,800-$4,500 |
| Fixed island with electrical only (GPR scan, conduit, panel work) | $4,200-$7,500 |
| Fixed island with sink and disposal (slab coring, engineer review, plumbing) | $7,000-$14,000+ |
Full kitchen island installs that include cabinetry, countertop, and finish work on an existing slab base land inside that third tier, but the top of the range climbs fast when the engineer review flags an intermediate cable or the coring needs to route around a tendon cluster. A small island with simple framing and no utilities comes in near the bottom of the range. A large island with a prep sink, a 20-amp circuit, and a waterfall-edge countertop sits at the top.
The brand roster matters at this stage, too. Bradford specs Cambria or Caesarstone quartz surfaces on McKinney island work because consistent slab thickness simplifies the waterfall-edge mitering that’s popular in the current remodel market. Named brands mean traceable specs and manufacturer warranties layered on top of Bradford’s own written guarantee. Sinks and fixtures typically come from Moen or Blanco; both bring spec sheets the coring contractor can plan around. When you’re reaching for something like a full Kitchen Remodeling that folds the island into cabinets and flooring, the same utility logic applies.

Permits, Sub-Permits, and the Contractor You Should Walk Away From
The City of McKinney requires electrical and plumbing sub-permits for any island that runs a circuit or a drain. Not a registered-only permit, not a verbal “we’ll handle it”: separate sub-permits pulled with the city, inspected, and closed out. Bradford pulls those permits as part of the written scope. If a contractor tells you permits are a waste of time on a utility island, that’s the point to show them the door. Skipped permits surface as a problem when you sell the house, and they void the slab warranty on the coring work.
- Electrical sub-permit: required for any dedicated circuit, disposal line, or island receptacle.
- Plumbing sub-permit: required for a sink drain, dishwasher line, or disposal rough-in.
- Structural engineer review: not a city permit, but non-negotiable on a post-tension slab. Bradford treats it as a line item in the written scope.
- GPR scan report: the as-built cable map your home never had. Keep the document; it’s useful for every future remodel.
Framing the scope any larger? Our Kitchen Remodeling in McKinney page covers cabinets, layout, and finish sequencing that sandwich the island work. See our home page for the full remodeling roster.
What the 365-Day Done Right Promise Covers on an Island
Every completed Bradford project carries the 365-Day Done Right Promise: if it isn’t right, we come back and fix it, at no charge, for a full year after completion. On island work, that guarantee applies to specific things, and you should see them named in the written guarantee, not implied.
- Countertop joint integrity: if a seam separates within the guarantee window, we return and correct it.
- Drawer hardware function: soft-close glides, hinges, and pulls that fail inside the year get replaced under the guarantee.
- Waterline and drain connections: any leak at the sink rough-in traced back to install work is covered.
- Electrical terminations: any loose or failed connection in the island circuit comes back to us.
Ask any McKinney remodeler to point at that list in writing inside their guarantee. If they can’t, you’ve learned everything you need to know. Our technicians have up to 22 years of experience running island installs on slab homes, and every crew member on the job is background-checked and uniformed: you know exactly who’s walking through your door before anyone shows up.
FAQs
Freestanding islands run $1,800-$4,500 installed, electrical-only fixed islands run $4,200-$7,500, and sink-and-disposal islands needing slab coring run $7,000-$14,000+. The utility trenching and engineer review are what separate the tiers, not the cabinetry. Call (844) 834-0609 for an exact number on your kitchen.
Yes, if your home is on a post-tension slab, and nearly all Stonebridge Ranch homes built after 1988 are. Any floor penetration for a drain, conduit, or anchor requires a ground-penetrating radar scan and a structural engineer’s sign-off before a coring contractor can safely cut. Skipping that step voids the slab warranty and can be a code violation. Bradford includes the scan and review as a written line item.
Plan 3-5 weeks from written scope to final inspection when the island needs a sink or dedicated circuit: 2-3 weeks for the GPR scan, engineer review, and coring contractor schedule, then 1-2 weeks of framing, plumbing, electrical, and countertop work. Freestanding islands without utilities usually finish inside a week. If you’re on a deadline, call (844) 834-0609 and we’ll build the realistic timeline into the quote.
Freestanding is cheaper, usually by $2,500-$9,500, because it skips the permit, the scan, and the coring. But a freestanding island can’t carry a sink or a circuit, and in McKinney’s expansive clay some homeowners prefer the anchor for stability. If your only goal is extra counter space, freestanding wins on cost. If you want a prep sink, it has to be fixed, and the PT-slab cost is part of the real number.
Get a Written Island Price Before Anything Else
Give us the room dimensions and whether the island needs a sink or a circuit, and we’ll walk you through what the slab allows before you spend a dollar on cabinets. Bradford Remodeling Co McKinney puts every price and every guarantee in writing, and a live person answers the phone 24/7. Call (844) 834-0609 for a free estimate on your McKinney kitchen island.
Written by the team at Bradford Remodeling Co McKinney, serving McKinney, TX.
What Our Customers Say
"Kitchen remodel run by a veteran-owned crew. They started on the day promised, kept the site clean, and gave weekly updates. New cabinets and counters look great."
- Alan M."Primary bath redo. Tile is straight, shower pan was flood tested, and the vanity fits perfectly."
- Tricia S."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P.












